The concept
The concept consists of two parts – a wearable sensor unit which can sense and analyze your environment, health, and local weather conditions, and a dedicated mobile phone.
The sensor unit will be worn on a wrist or neck strap made from solar cells that provide power to the sensors. NFC (near field communication) and RFID (radio frequency identification) technologies will relay information from the sensors to the phone or to other devices that support RFID technology.
Both the phone and the sensor unit will be as compact as possible to minimize material use, and those materials used in the design will be renewable and/or reclaimed. Technologies used inside the phone and sensor unit will also help save energy.
Here are some other examples of customized sensing devices you could build:
- Environmental monitoring
- Atmospheric gas
- level monitor (including carbon monoxide, particulate matter, and ground
- level ozone detectors, for example)
- Ultraviolet radiation sensor
- Subscription to environmental catastrophe warning and guidance systemPersonal health
- Motion detector
- Heart rate monitor
- Noise level monitorWeather monitoring
- Air pressure sensor
- Humidity sensor
- Temperature sensor
- Subscription to environmental catastrophe warning and guidance system
A mobile device that builds on the "three Rs"Reduce, reuse and recycle – the Nokia Eco Sensor Concept is built upon all three of these underlying principles of waste reduction. Emphasis will be placed on materials use and reuse in the phone’s construction:
Printed electronics-Printed electronics is an innovative technology in which simple components are created by printing electrically conductive inks (nanoinks) onto surfaces such as plastic using standard printing processes. The technology allows us to create smaller electronic components – and smaller components mean more compact phones!
Bio-materials- Bio-materials, such as polylactic acid (PLA) plastics with plant or other biomass-based modifiers, can help to reduce the use of non-renewable materials. An additional bonus is that the energy required to produce PLA - from raw material to plastic pellet - is minimal.- Elastomers based on biomaterials can be used as rubber-like materials to seal off battery case.
Reclaimed materials- The phone’s casing will be made from 100% reclaimed steel. Imagine – your scrapped car could become part of your next mobile phone!
A phone for the energy-conscious consumer-To complete the Nokia Eco Sensor Concept, the phone and detector units will be optimized for lower energy consumption than phones in 2007 in both the manufacturing process and use. Alternative energy sources, such as solar power, will fuel the sensor unit’s power usage. Thus, we aim to create a self-powered sensing device to reduce dependence on external, non-renewable energy sources.
Electronics- Printed electronics consume less energy during manufacturing than traditional circuit board production and will be used in the phone, detection units, and their chargers.
Display screens- Display technologies widely in use in 2007, such as liquid crystal display (LCD) or organic light-emitting diode (OLED), are continuously evolving – resulting in increasingly energy-efficient screens. But other technologies, such as electrowetting, also exist that produce screens that consume less energy than LED or OLED displays.- Electrowetting is the process of applying electrical voltage to tiny drops of oil, causing the droplets to expand and contract. When compressed under the display glass, expanding droplets produce an effect similar to a pixel "lighting up," whereas contracting droplets can be compared to a pixel "turning off."
Alternative energy sources- The wearable sensor unit will be powered by alternative energy sources, and may incorporate multiple energy technologies: Solar energy will be harvested from the device strap, which would be made from solar cells.- Kinetic (energy derived from motion) and heat energy might also be harvested from the user, in the way some wristwatches already get their power.
Innovative ServicesThe possibilities to introduce creative and useful mobile applications and web services that build upon the environmental data collected from such a design concept are numerous. These services can range from personal health monitoring and improvement, to large-scale collective efforts to promote sustainable lifestyle choices. Even very simple environmental variables can bring about novel solutions when shared and integrated into a global network of mobile explorers.
Where next?
By creating the Nokia Eco Sensor Concept, we hope to stimulate an ongoing discussion and idea sharing – both within the mobile industry and with consumers. Through these discussions, we hope to gain a better understanding of what we can do with mobile technology in the near future and how we can lead the mobile industry towards a sustainable future.
Sense your world
The Nokia Eco Sensor Concept includes a range of built-in sensors to help you monitor your health, environment, and local weather.Less to carryPrinted electronics can significantly decrease the size of a device by an estimated 50% from phones in 2007.
[source : nokia]
No comments:
Post a Comment